ADM2461EBRWZ-RL vs ISO1410DW Comparison
Detailed side-by-side comparison of ADM2461EBRWZ-RL by Analog Devices and ISO1410DW by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ ActiveSpecification Comparison
| Parameter | ADM2461EBRWZ-RL | ISO1410DW |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half Duplex | — |
| Maximum Data Rate | 500 kbps | 500 Kbps |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | [DATA_NEEDED: common-mode voltage range] |
| Operating Temperature | -40C to +85C | — |
| Package | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 16-pin wide-body SOIC (DW) |
| Mounting Type | Surface Mount | Surface mount |
| MSL Level | 3 | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS compliance] |
| Device Type | — | 1/1 isolated RS-422 and RS-485 transceiver |
| Isolation Voltage | — | 5 kVrms |
| Isolation Type | — | Galvanic isolation |
| Bus Compatibility | — | TIA/EIA RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | EMC protected |
| Operating Temperature Range | — | -40°C to +125°C |
| Number of Transceivers | — | 1 |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Logic-Side Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-Side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| ESD Protection | — | Bus pins endure high levels of IEC electrostatic discharge events |
| EFT Protection | — | Bus pins endure high levels of IEC electrical fast transient events |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |