ADM2461EBRWZ-RL vs ISO1410DW Karşılaştırma

Ayrıntılı yan yana karşılaştırma ADM2461EBRWZ-RL tarafından Analog Devices ve ISO1410DW tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre ADM2461EBRWZ-RL ISO1410DW
Marka Analog Devices Texas Instruments
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type Isolated RS-485 / RS-422 Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half Duplex —
Maximum Data Rate 500 kbps 500 Kbps
Isolation Voltage (rms) 5.7 kV rms —
ESD Protection (Bus Pins) ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) —
Receiver Hysteresis 30 mV typical —
Unit Load 1/8 (up to 256 nodes) —
Supply Voltage - Logic Side (VDD1) 3.0 V to 5.5 V —
Supply Voltage - Bus Side (VDD2) 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) —
Common-Mode Voltage Range -25 V to +25 V [DATA_NEEDED: common-mode voltage range]
İşletim Sıcaklığı -40C to +85C —
Paket 16-SOIC_W (Wide Body, 7.5 mm creepage) 16-pin wide-body SOIC (DW)
Montaj Türü Surface Mount Surface mount
MSL Seviyesi 3 —
RoHS Durumu Compliant [DATA_NEEDED: RoHS compliance]
Device Type — 1/1 isolated RS-422 and RS-485 transceiver
Isolation Voltage — 5 kVrms
Isolation Type — Galvanic isolation
Bus Compatibility — TIA/EIA RS-485 and RS-422
Duplex Mode — Half-duplex
EMC Protection — EMC protected
İşletim Sıcaklığı Aralığı — -40°C to +125°C
Number of Transceivers — 1
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
Logic-Side Supply Voltage — [DATA_NEEDED: logic-side supply voltage]
Bus-Side Supply Voltage — [DATA_NEEDED: bus-side supply voltage]
Output Differential Voltage — [DATA_NEEDED: output differential voltage]
Receiver Sensitivity — [DATA_NEEDED: receiver sensitivity]
Propagation Delay — [DATA_NEEDED: propagation delay]
ESD Protection — Bus pins endure high levels of IEC electrostatic discharge events
EFT Protection — Bus pins endure high levels of IEC electrical fast transient events
REACH Status — [DATA_NEEDED: REACH compliance]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin