ADM2461EBRWZ-RL vs ISO1410DW Vergleich
Detaillierter Direktvergleich von ADM2461EBRWZ-RL von Analog Devices und ISO1410DW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ AktivSpezifikationsvergleich
| Parameter | ADM2461EBRWZ-RL | ISO1410DW |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half Duplex | — |
| Maximum Data Rate | 500 kbps | 500 Kbps |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | [DATA_NEEDED: common-mode voltage range] |
| Betriebstemperatur | -40C to +85C | — |
| Gehäuse | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 16-pin wide-body SOIC (DW) |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | 3 | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance] |
| Device Type | — | 1/1 isolated RS-422 and RS-485 transceiver |
| Isolation Voltage | — | 5 kVrms |
| Isolation Type | — | Galvanic isolation |
| Bus Compatibility | — | TIA/EIA RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | EMC protected |
| Betriebstemperaturbereich | — | -40°C to +125°C |
| Number of Transceivers | — | 1 |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Logic-Side Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-Side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| ESD Protection | — | Bus pins endure high levels of IEC electrostatic discharge events |
| EFT Protection | — | Bus pins endure high levels of IEC electrical fast transient events |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |