ADM2461EBRWZ-RL vs ISO1410DW 비교
다음의 상세 나란히 비교: ADM2461EBRWZ-RL 제조: Analog Devices 및 ISO1410DW 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ 활성사양 비교
| 파라미터 | ADM2461EBRWZ-RL | ISO1410DW |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half Duplex | — |
| Maximum Data Rate | 500 kbps | 500 Kbps |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | [DATA_NEEDED: common-mode voltage range] |
| 동작 온도 | -40C to +85C | — |
| 패키지 | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 16-pin wide-body SOIC (DW) |
| 실장 유형 | Surface Mount | Surface mount |
| MSL 레벨 | 3 | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS compliance] |
| Device Type | — | 1/1 isolated RS-422 and RS-485 transceiver |
| Isolation Voltage | — | 5 kVrms |
| Isolation Type | — | Galvanic isolation |
| Bus Compatibility | — | TIA/EIA RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | EMC protected |
| 동작 온도 범위 | — | -40°C to +125°C |
| Number of Transceivers | — | 1 |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Logic-Side Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-Side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| ESD Protection | — | Bus pins endure high levels of IEC electrostatic discharge events |
| EFT Protection | — | Bus pins endure high levels of IEC electrical fast transient events |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |