ADM2461EBRWZ-RL vs ISO1410DW तुलना
विस्तृत दोनों ओर की तुलना ADM2461EBRWZ-RL द्वारा Analog Devices और ISO1410DW द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADM2461EBRWZ-RL - 500kbps Isolated RS-485/RS-422 Transceiver | ADI
ADM2461EBRWZ-RL ✓ सक्रियविशेषता तुलना
| पैरामीटर | ADM2461EBRWZ-RL | ISO1410DW |
|---|---|---|
| ब्रांड | Analog Devices | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Isolated RS-485 / RS-422 Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half Duplex | — |
| Maximum Data Rate | 500 kbps | 500 Kbps |
| Isolation Voltage (rms) | 5.7 kV rms | — |
| ESD Protection (Bus Pins) | ±15 kV IEC (HBM:Human Body Model per IEC 61000-4-2) | — |
| Receiver Hysteresis | 30 mV typical | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Supply Voltage - Logic Side (VDD1) | 3.0 V to 5.5 V | — |
| Supply Voltage - Bus Side (VDD2) | 3.0 V to 5.5 V (isolated, supplied by internal DC-DC driver) | — |
| Common-Mode Voltage Range | -25 V to +25 V | [DATA_NEEDED: common-mode voltage range] |
| ऑपरेटिंग तापमान | -40C to +85C | — |
| पैकेज | 16-SOIC_W (Wide Body, 7.5 mm creepage) | 16-pin wide-body SOIC (DW) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| MSL स्तर | 3 | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS compliance] |
| Device Type | — | 1/1 isolated RS-422 and RS-485 transceiver |
| Isolation Voltage | — | 5 kVrms |
| Isolation Type | — | Galvanic isolation |
| Bus Compatibility | — | TIA/EIA RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| EMC Protection | — | EMC protected |
| ऑपरेटिंग तापमान रेंज | — | -40°C to +125°C |
| Number of Transceivers | — | 1 |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Logic-Side Supply Voltage | — | [DATA_NEEDED: logic-side supply voltage] |
| Bus-Side Supply Voltage | — | [DATA_NEEDED: bus-side supply voltage] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| ESD Protection | — | Bus pins endure high levels of IEC electrostatic discharge events |
| EFT Protection | — | Bus pins endure high levels of IEC electrical fast transient events |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |