ADM3485EARZ vs SN65HVD73DGSR Comparison
Detailed side-by-side comparison of ADM3485EARZ by Analog Devices and SN65HVD73DGSR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ ActiveSpecification Comparison
| Parameter | ADM3485EARZ | SN65HVD73DGSR |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485 / RS-422 Full-Duplex Transceiver |
| Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection | ±15 kV | — |
| Duplex Mode | Half-duplex | — |
| Communication Standard | EIA RS-485 and TIA/EIA RS-422 | — |
| Bus Configuration | Multipoint bus transmission | — |
| Driver Enable Control | Yes | — |
| Receiver Enable Control | Yes | — |
| Low-Power Operation | Yes | — |
| Package | 8-pin SOIC | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD |
| Mounting Type | Surface mount | Surface Mount |
| Operating Temperature Range | [DATA_NEEDED: Operating temperature range] | -40 °C to +125 °C |
| Quiescent Current | [DATA_NEEDED: Quiescent current] | — |
| Shutdown Current | [DATA_NEEDED: Shutdown current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: Common-mode voltage range] | [DATA_NEEDED: -7 V to +12 V typical] |
| Receiver Input Resistance | [DATA_NEEDED: Receiver input resistance] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Part Number | — | SN65HVD73DGSR |
| Manufacturer | — | Texas Instruments |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Data Rate (max) | — | 20 Mbps |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Full |
| Receiver Hysteresis | — | [DATA_NEEDED: typical receiver hysteresis in mV] |
| ESD Protection - HBM (bus pins) | — | ±30 kV |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | — | ±12 kV |
| Unit Load | — | 1/8 (up to 256 nodes) |
| MSL Level | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |
| Enable Pins | — | DE (driver enable, active-high); RE (receiver enable, active-low) |