ADM3485EARZ vs SN65HVD73DGSR Comparación
Comparación detallada lado a lado de ADM3485EARZ por Analog Devices y SN65HVD73DGSR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ ActivoComparación de especificaciones
| Parámetro | ADM3485EARZ | SN65HVD73DGSR |
|---|---|---|
| Marca | Analog Devices | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485 / RS-422 Full-Duplex Transceiver |
| Tensión de alimentación | 3.3 V | — |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection | ±15 kV | — |
| Duplex Mode | Half-duplex | — |
| Communication Standard | EIA RS-485 and TIA/EIA RS-422 | — |
| Bus Configuration | Multipoint bus transmission | — |
| Driver Enable Control | Yes | — |
| Receiver Enable Control | Yes | — |
| Low-Power Operation | Yes | — |
| Encapsulado | 8-pin SOIC | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD |
| Tipo de montaje | Surface mount | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: Operating temperature range] | -40 °C to +125 °C |
| Corriente en reposo | [DATA_NEEDED: Quiescent current] | — |
| Corriente de apagado | [DATA_NEEDED: Shutdown current] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: Common-mode voltage range] | [DATA_NEEDED: -7 V to +12 V typical] |
| Receiver Input Resistance | [DATA_NEEDED: Receiver input resistance] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Part Number | — | SN65HVD73DGSR |
| Manufacturer | — | Texas Instruments |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Data Rate (max) | — | 20 Mbps |
| Number of Drivers / Receivers | — | 1 / 1 |
| Duplex | — | Full |
| Receiver Hysteresis | — | [DATA_NEEDED: typical receiver hysteresis in mV] |
| ESD Protection - HBM (bus pins) | — | ±30 kV |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | — | ±12 kV |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Nivel MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |
| Enable Pins | — | DE (driver enable, active-high); RE (receiver enable, active-low) |