ADM3485EARZ vs SN65HVD73DGSR Karşılaştırma

Ayrıntılı yan yana karşılaştırma ADM3485EARZ tarafından Analog Devices ve SN65HVD73DGSR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Analog Devices
ADM3485EARZ ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ ✓ Aktif
Texas Instruments
SN65HVD73DGSR SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR ✓ Aktif

Özellik Karşılaştırması

Parametre ADM3485EARZ SN65HVD73DGSR
Marka Analog Devices Texas Instruments
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type RS-485/RS-422 differential line transceiver RS-485 / RS-422 Full-Duplex Transceiver
Besleme Gerilimi 3.3 V —
Maximum Data Rate 12 Mbps —
ESD Protection ±15 kV —
Duplex Mode Half-duplex —
Communication Standard EIA RS-485 and TIA/EIA RS-422 —
Bus Configuration Multipoint bus transmission —
Driver Enable Control Yes —
Receiver Enable Control Yes —
Low-Power Operation Yes —
Paket 8-pin SOIC VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD
Montaj Türü Surface mount Surface Mount
İşletim Sıcaklığı Aralığı [DATA_NEEDED: Operating temperature range] -40 °C to +125 °C
Durağan Akım [DATA_NEEDED: Quiescent current] —
Kapatma Akımı [DATA_NEEDED: Shutdown current] —
Common-Mode Voltage Range [DATA_NEEDED: Common-mode voltage range] [DATA_NEEDED: -7 V to +12 V typical]
Receiver Input Resistance [DATA_NEEDED: Receiver input resistance] —
RoHS Durumu [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Part Number — SN65HVD73DGSR
Manufacturer — Texas Instruments
Supply Voltage (VCC) — 3.0 V to 3.6 V
Data Rate (max) — 20 Mbps
Number of Drivers / Receivers — 1 / 1
Duplex — Full
Receiver Hysteresis — [DATA_NEEDED: typical receiver hysteresis in mV]
ESD Protection - HBM (bus pins) — ±30 kV
ESD Protection - IEC 61000-4-2 Contact (bus pins) — ±12 kV
Unit Load — 1/8 (up to 256 nodes)
MSL Seviyesi — [DATA_NEEDED: MSL rating per JEDEC J-STD-020]
Enable Pins — DE (driver enable, active-high); RE (receiver enable, active-low)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin