ADM3485EARZ vs SN65HVD73DGSR Comparação

Comparação detalhada lado a lado de ADM3485EARZ por Analog Devices e SN65HVD73DGSR por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.

Analog Devices
ADM3485EARZ ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ ✓ Ativo
Texas Instruments
SN65HVD73DGSR SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR ✓ Ativo

Comparação de especificações

Parâmetro ADM3485EARZ SN65HVD73DGSR
Marca Analog Devices Texas Instruments
Categoria Interface ICs Interface ICs
Status do ciclo de vida Ativo Ativo
Product Type RS-485/RS-422 differential line transceiver RS-485 / RS-422 Full-Duplex Transceiver
Tensão de alimentação 3.3 V —
Maximum Data Rate 12 Mbps —
ESD Protection ±15 kV —
Duplex Mode Half-duplex —
Communication Standard EIA RS-485 and TIA/EIA RS-422 —
Bus Configuration Multipoint bus transmission —
Driver Enable Control Yes —
Receiver Enable Control Yes —
Low-Power Operation Yes —
Encapsulamento 8-pin SOIC VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD
Tipo de montagem Surface mount Surface Mount
Faixa de temperatura de operação [DATA_NEEDED: Operating temperature range] -40 °C to +125 °C
Corrente de repouso [DATA_NEEDED: Quiescent current] —
Corrente de desligamento [DATA_NEEDED: Shutdown current] —
Common-Mode Voltage Range [DATA_NEEDED: Common-mode voltage range] [DATA_NEEDED: -7 V to +12 V typical]
Receiver Input Resistance [DATA_NEEDED: Receiver input resistance] —
Status RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Part Number — SN65HVD73DGSR
Manufacturer — Texas Instruments
Supply Voltage (VCC) — 3.0 V to 3.6 V
Data Rate (max) — 20 Mbps
Number of Drivers / Receivers — 1 / 1
Duplex — Full
Receiver Hysteresis — [DATA_NEEDED: typical receiver hysteresis in mV]
ESD Protection - HBM (bus pins) — ±30 kV
ESD Protection - IEC 61000-4-2 Contact (bus pins) — ±12 kV
Unit Load — 1/8 (up to 256 nodes)
Nível MSL — [DATA_NEEDED: MSL rating per JEDEC J-STD-020]
Enable Pins — DE (driver enable, active-high); RE (receiver enable, active-low)

Fichas técnicas e recursos

Ver todos os produtos Criar BOM Solicitar cotação