ADM3485EARZ vs SN65HVD73DGSR Perbandingan

Perbandingan bersamaan detil ADM3485EARZ dari Analog Devices dan SN65HVD73DGSR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Analog Devices
ADM3485EARZ ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ - 3.3V 12Mbps RS-485/RS-422 Transceiver | ADI

ADM3485EARZ ✓ Aktif
Texas Instruments
SN65HVD73DGSR SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum ADM3485EARZ SN65HVD73DGSR
Merek Analog Devices Texas Instruments
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type RS-485/RS-422 differential line transceiver RS-485 / RS-422 Full-Duplex Transceiver
Tegangan Pemuat 3.3 V —
Maximum Data Rate 12 Mbps —
ESD Protection ±15 kV —
Duplex Mode Half-duplex —
Communication Standard EIA RS-485 and TIA/EIA RS-422 —
Bus Configuration Multipoint bus transmission —
Driver Enable Control Yes —
Receiver Enable Control Yes —
Low-Power Operation Yes —
Paket 8-pin SOIC VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD
Tipe Mounting Surface mount Surface Mount
Rentang Suhu Kerja [DATA_NEEDED: Operating temperature range] -40 °C to +125 °C
Arus Memerintah [DATA_NEEDED: Quiescent current] —
Arus Menutup [DATA_NEEDED: Shutdown current] —
Common-Mode Voltage Range [DATA_NEEDED: Common-mode voltage range] [DATA_NEEDED: -7 V to +12 V typical]
Receiver Input Resistance [DATA_NEEDED: Receiver input resistance] —
Status RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Part Number — SN65HVD73DGSR
Manufacturer — Texas Instruments
Supply Voltage (VCC) — 3.0 V to 3.6 V
Data Rate (max) — 20 Mbps
Number of Drivers / Receivers — 1 / 1
Duplex — Full
Receiver Hysteresis — [DATA_NEEDED: typical receiver hysteresis in mV]
ESD Protection - HBM (bus pins) — ±30 kV
ESD Protection - IEC 61000-4-2 Contact (bus pins) — ±12 kV
Unit Load — 1/8 (up to 256 nodes)
Level MSL — [DATA_NEEDED: MSL rating per JEDEC J-STD-020]
Enable Pins — DE (driver enable, active-high); RE (receiver enable, active-low)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon