ADM483EARZ-REEL vs ADM4850AR Comparison
Detailed side-by-side comparison of ADM483EARZ-REEL by Analog Devices and ADM4850AR by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ ActiveSpecification Comparison
| Parameter | ADM483EARZ-REEL | ADM4850AR |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Function | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Supply Voltage | 5 V ±10% | 5 V |
| Data Rate | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| Supply Current | 36 µA (typical, no load) | [DATA_NEEDED: typical and maximum supply current] |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Slew-rate limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | True fail-safe receiver |
| Short-Circuit Protection | Yes (driver outputs) | — |
| Operating Temperature | -40°C to +85°C | — |
| Package | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| Mounting Type | Surface Mount | Surface mount |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Manufacturer | — | Analog Devices |
| Maximum Data Rate | — | 115 kbps |
| Communication Standard | — | EIA RS-485 and RS-422 |
| Duplex Support | — | Half-duplex and full-duplex |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Bus Configuration | — | Multipoint bus transmission lines |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |