ADM483EARZ-REEL vs ADM4850AR 비교
다음의 상세 나란히 비교: ADM483EARZ-REEL 제조: Analog Devices 및 ADM4850AR 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ 활성사양 비교
| 파라미터 | ADM483EARZ-REEL | ADM4850AR |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 기능 | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 공급 전압 | 5 V ±10% | 5 V |
| 데이터 속도 | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| 공급 전류 | 36 µA (typical, no load) | [DATA_NEEDED: typical and maximum supply current] |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Slew-rate limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | True fail-safe receiver |
| Short-Circuit Protection | Yes (driver outputs) | — |
| 동작 온도 | -40°C to +85°C | — |
| 패키지 | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| 실장 유형 | Surface Mount | Surface mount |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Manufacturer | — | Analog Devices |
| Maximum Data Rate | — | 115 kbps |
| Communication Standard | — | EIA RS-485 and RS-422 |
| Duplex Support | — | Half-duplex and full-duplex |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Bus Configuration | — | Multipoint bus transmission lines |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| 동작 온도 범위 | — | [DATA_NEEDED: operating temperature range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |