ADM483EARZ-REEL vs ADM4850AR 对比
详细并排对比 ADM483EARZ-REEL 出自 Analog Devices 和 ADM4850AR 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ 量产中规格对比
| 参数 | ADM483EARZ-REEL | ADM4850AR |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| 功能 | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 电源电压 | 5 V ±10% | 5 V |
| 数据速率 | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| 电源电流 | 36 µA (typical, no load) | [DATA_NEEDED: typical and maximum supply current] |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Slew-rate limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | True fail-safe receiver |
| Short-Circuit Protection | Yes (driver outputs) | — |
| 工作温度 | -40°C to +85°C | — |
| 封装 | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| 安装类型 | Surface Mount | Surface mount |
| RoHS 状态 | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Manufacturer | — | Analog Devices |
| Maximum Data Rate | — | 115 kbps |
| Communication Standard | — | EIA RS-485 and RS-422 |
| Duplex Support | — | Half-duplex and full-duplex |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Bus Configuration | — | Multipoint bus transmission lines |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| 工作温度范围 | — | [DATA_NEEDED: operating temperature range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |