ADM483EARZ-REEL vs ADM4850AR مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ ADM483EARZ-REEL بواسطة Analog Devices و ADM4850AR بواسطة Analog Devices. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ نشطمقارنة المواصفات
| المعامل | ADM483EARZ-REEL | ADM4850AR |
|---|---|---|
| العلامة التجارية | Analog Devices | Analog Devices |
| الفئة | Interface ICs | Interface ICs |
| حالة دورة الحياة | نشط | نشط |
| الوظيفة | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| جهد التغذية | 5 V ±10% | 5 V |
| معدل البيانات | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| تيار التغذية | 36 µA (typical, no load) | [DATA_NEEDED: typical and maximum supply current] |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Slew-rate limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | True fail-safe receiver |
| Short-Circuit Protection | Yes (driver outputs) | — |
| درجة حرارة التشغيل | -40°C to +85°C | — |
| العلبة | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| نوع التركيب | Surface Mount | Surface mount |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Manufacturer | — | Analog Devices |
| Maximum Data Rate | — | 115 kbps |
| Communication Standard | — | EIA RS-485 and RS-422 |
| Duplex Support | — | Half-duplex and full-duplex |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Bus Configuration | — | Multipoint bus transmission lines |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| نطاق درجة حرارة التشغيل | — | [DATA_NEEDED: operating temperature range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |