ADM483EARZ-REEL vs ADM4850AR 比較
詳細並排比較 ADM483EARZ-REEL 由 Analog Devices 與 ADM4850AR 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ 啟用中規格比較
| 參數 | ADM483EARZ-REEL | ADM4850AR |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 功能 | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 供應電壓 | 5 V ±10% | 5 V |
| 資料速率 | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| 供應電流 | 36 µA (typical, no load) | [DATA_NEEDED: typical and maximum supply current] |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Slew-rate limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | True fail-safe receiver |
| Short-Circuit Protection | Yes (driver outputs) | — |
| 工作溫度 | -40°C to +85°C | — |
| 封裝 | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| 安裝類型 | Surface Mount | Surface mount |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | Differential RS-485/RS-422 line transceiver |
| Manufacturer | — | Analog Devices |
| Maximum Data Rate | — | 115 kbps |
| Communication Standard | — | EIA RS-485 and RS-422 |
| Duplex Support | — | Half-duplex and full-duplex |
| Transmitter and Receiver Count | — | 1 transmitter and 1 receiver |
| Bus Configuration | — | Multipoint bus transmission lines |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| REACH Status | — | [DATA_NEEDED: REACH status] |