ADM483EARZ-REEL vs ADM4852AR Comparison
Detailed side-by-side comparison of ADM483EARZ-REEL by Analog Devices and ADM4852AR by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ ActiveSpecification Comparison
| Parameter | ADM483EARZ-REEL | ADM4852AR |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Function | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Supply Voltage | 5 V ±10% | 5 V |
| Data Rate | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| Supply Current | 36 µA (typical, no load) | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | — |
| Short-Circuit Protection | Yes (driver outputs) | — |
| Operating Temperature | -40°C to +85°C | — |
| Package | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| Mounting Type | Surface Mount | Surface mount |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 2.5 Mbps |
| Communication Modes | — | Half-duplex and full-duplex |
| Standards Compatibility | — | EIA RS-485 and RS-422 |
| Fail-Safe Receiver | — | True fail-safe |
| Bus Topology | — | Multipoint bus transmission lines |
| Number of Pins | — | 8 pins |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |