ADM483EARZ-REEL vs ADM4852AR तुलना

विस्तृत दोनों ओर की तुलना ADM483EARZ-REEL द्वारा Analog Devices और ADM4852AR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
ADM483EARZ-REEL ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices

ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices

ADM483EARZ-REEL ✓ सक्रिय
Analog Devices
ADM4852AR ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR ✓ सक्रिय

विशेषता तुलना

पैरामीटर ADM483EARZ-REEL ADM4852AR
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
सप्लाई वोल्टेज 5 V ±10% 5 V
डेटा दर 250 kbps —
ESD Protection (bus pins) ±15 kV (HBM, per IEC 61000-4-2 air-discharge) —
सप्लाई करंट 36 µA (typical, no load) —
Bus Common-Mode Range -7 V to +12 V —
Number of Nodes on Bus Up to 32 —
Slew Rate Limited (reduced for low EMI) Limited
Receiver Fail-Safe Yes (open-circuit, shorted input) —
Short-Circuit Protection Yes (driver outputs) —
ऑपरेटिंग तापमान -40°C to +85°C —
पैकेज 8-SOIC (SO-8, 3.9 mm body width) 8-lead SOIC
माउंटिंग प्रकार Surface Mount Surface mount
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status]
Standards Compliance TIA/EIA-485-A, TIA/EIA-422 —
Product Type — RS-485/RS-422 differential line transceiver
Maximum Data Rate — 2.5 Mbps
Communication Modes — Half-duplex and full-duplex
Standards Compatibility — EIA RS-485 and RS-422
Fail-Safe Receiver — True fail-safe
Bus Topology — Multipoint bus transmission lines
पिन की संख्या — 8 pins
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
Propagation Delay — [DATA_NEEDED: propagation delay]
क्वाइसेंट करंट — [DATA_NEEDED: quiescent current]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध