ADM483EARZ-REEL vs ADM4852AR Comparação
Comparação detalhada lado a lado de ADM483EARZ-REEL por Analog Devices e ADM4852AR por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ AtivoComparação de especificações
| Parâmetro | ADM483EARZ-REEL | ADM4852AR |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Função | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tensão de alimentação | 5 V ±10% | 5 V |
| Taxa de dados | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| Corrente de alimentação | 36 µA (typical, no load) | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | — |
| Short-Circuit Protection | Yes (driver outputs) | — |
| Temperatura de operação | -40°C to +85°C | — |
| Encapsulamento | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| Tipo de montagem | Surface Mount | Surface mount |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 2.5 Mbps |
| Communication Modes | — | Half-duplex and full-duplex |
| Standards Compatibility | — | EIA RS-485 and RS-422 |
| Fail-Safe Receiver | — | True fail-safe |
| Bus Topology | — | Multipoint bus transmission lines |
| Número de pinos | — | 8 pins |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Corrente de repouso | — | [DATA_NEEDED: quiescent current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |