ADM483EARZ-REEL vs ADM4852AR So sánh

So sánh chi tiết song song của ADM483EARZ-REEL bằng Analog Devices và ADM4852AR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM483EARZ-REEL ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices

ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices

ADM483EARZ-REEL ✓ Hoạt động
Analog Devices
ADM4852AR ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR - 2.5Mbps RS-485 Transceiver | Analog Devices

ADM4852AR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADM483EARZ-REEL ADM4852AR
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Điện áp cung cấp 5 V ±10% 5 V
Tốc độ dữ liệu 250 kbps —
ESD Protection (bus pins) ±15 kV (HBM, per IEC 61000-4-2 air-discharge) —
Điện áp cung cấp 36 µA (typical, no load) —
Bus Common-Mode Range -7 V to +12 V —
Number of Nodes on Bus Up to 32 —
Slew Rate Limited (reduced for low EMI) Limited
Receiver Fail-Safe Yes (open-circuit, shorted input) —
Short-Circuit Protection Yes (driver outputs) —
Nhiệt độ hoạt động -40°C to +85°C —
Hộp 8-SOIC (SO-8, 3.9 mm body width) 8-lead SOIC
Kiểu lắp đặt Surface Mount Surface mount
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS status]
Standards Compliance TIA/EIA-485-A, TIA/EIA-422 —
Product Type — RS-485/RS-422 differential line transceiver
Maximum Data Rate — 2.5 Mbps
Communication Modes — Half-duplex and full-duplex
Standards Compatibility — EIA RS-485 and RS-422
Fail-Safe Receiver — True fail-safe
Bus Topology — Multipoint bus transmission lines
Số lượng chân — 8 pins
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Differential Threshold — [DATA_NEEDED: receiver differential threshold]
Propagation Delay — [DATA_NEEDED: propagation delay]
Điện áp yên tĩnh — [DATA_NEEDED: quiescent current]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá