ADM483EARZ-REEL vs ADM4852AR Comparaison
Comparaison détaillée côte à côte de ADM483EARZ-REEL par Analog Devices et ADM4852AR par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM483EARZ-REEL - 5V ±15kV ESD RS-485 Transceiver | Analog Devices
ADM483EARZ-REEL ✓ ActifComparaison des spécifications
| Paramètre | ADM483EARZ-REEL | ADM4852AR |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tension d'alimentation | 5 V ±10% | 5 V |
| Débit de données | 250 kbps | — |
| ESD Protection (bus pins) | ±15 kV (HBM, per IEC 61000-4-2 air-discharge) | — |
| Courant d'alimentation | 36 µA (typical, no load) | — |
| Bus Common-Mode Range | -7 V to +12 V | — |
| Number of Nodes on Bus | Up to 32 | — |
| Slew Rate | Limited (reduced for low EMI) | Limited |
| Receiver Fail-Safe | Yes (open-circuit, shorted input) | — |
| Short-Circuit Protection | Yes (driver outputs) | — |
| Température de fonctionnement | -40°C to +85°C | — |
| Boîtier | 8-SOIC (SO-8, 3.9 mm body width) | 8-lead SOIC |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Standards Compliance | TIA/EIA-485-A, TIA/EIA-422 | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Maximum Data Rate | — | 2.5 Mbps |
| Communication Modes | — | Half-duplex and full-duplex |
| Standards Compatibility | — | EIA RS-485 and RS-422 |
| Fail-Safe Receiver | — | True fail-safe |
| Bus Topology | — | Multipoint bus transmission lines |
| Nombre de broches | — | 8 pins |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |