BTG70902EPLXUMA1 vs BTS51202EKAXUMA1 Comparison
Detailed side-by-side comparison of BTG70902EPLXUMA1 by Infineon and BTS51202EKAXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTG70902EPLXUMA1
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 β ActiveInfineon
BTS51202EKAXUMA1
BTS51202EKAXUMA1 - 120 mΞ© Dual Smart High-Side Switch | Infineon
BTS51202EKAXUMA1 β ActiveSpecification Comparison
| Parameter | BTG70902EPLXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.99 | $1.68 |
| Product Family | PROFET+2 12V | β |
| Function | Smart High-Side Power Switch | β |
| Number of Channels | 1 | 2 |
| Input-to-Output Ratio | 1:1 | β |
| Output Configuration | N-Channel High-Side | β |
| Continuous Load Current | 2 A | β |
| Nominal Operating Voltage | 12 V (automotive bus) | β |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range min/max] | β |
| On-State Resistance (Ron) | [DATA_NEEDED: Rdson typ/max in mohm] | β |
| Current Limit | Fixed (value not specified in retrieved data) | β |
| Protection Features | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery | β |
| Diagnostic Output | DEN pin (current sense / fault flag) | Yes (status feedback pin) |
| Enable Input | IN pin (active-high) | β |
| Channel Select | DSEL pin | β |
| Slew Rate Control | Yes (internal, for EMI) | β |
| Package | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Operating Junction Temperature | -40 C to +150 C | β |
| Automotive Qualification | AEC-Q100 (PROFET+2 family targeted at automotive) | β |
| RoHS Status | Compliant | Compliant |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | β |
| Topology | β | Dual High-Side Switch (2 channels) |
| Technology | β | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | β | 120 mΞ© (typical per channel) |
| Continuous Output Current | β | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | β | 8 V to 18 V |
| Load Type | β | Lamps up to 1Γ10 W, LEDs, resistive/inductive loads |
| Operating Temperature | β | -40 Β°C to +150 Β°C |
| Maximum Power Dissipation | β | 1800 mW |
| Integrated Protection | β | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Charge Pump | β | Integrated |
| Automotive Qualified | β | Yes |