BTS71202EPGXUMA1 vs BTS51202EKAXUMA1 Comparison
Detailed side-by-side comparison of BTS71202EPGXUMA1 by Infineon and BTS51202EKAXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS71202EPGXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart High-Side Power Switch (PROFET +12V) | — |
| Number of Channels | 2 (independent) | 2 |
| Topology | High-side N-channel MOSFET with charge pump | Dual High-Side Switch (2 channels) |
| Continuous Load Current per Channel | 2 A | — |
| On-Resistance (Rds(on)) | 110 mΩ typical | — |
| Operating Voltage (Vbb) | 3.1 V to 28 V | 8 V to 18 V |
| Logic Input Voltage (IN) | Active high, CMOS-compatible | — |
| Standby Current | [DATA_NEEDED: standby current value] | — |
| Current Sense Output (IS) | Analog proportional to load current | — |
| Over-Temperature Protection | Yes (thermal shutdown with auto-restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (–16 V rated via integrated path) | — |
| Short-Circuit Protection | Yes (current-limit, latching/off behaviour per mode) | — |
| Inductive Load Clamping | Yes (built-in active clamp) | — |
| Operating Temperature Range | -40 °C to +150 °C junction | — |
| Package | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Yes | — |
| RoHS Compliance | Compliant (lead-free) | — |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Operating Temperature | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |
| RoHS Status | — | Compliant |