BTS71202EPGXUMA1 vs BTS51202EKAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS71202EPGXUMA1 von Infineon und BTS51202EKAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS71202EPGXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,98 | $1,68 |
| Product Type | Smart High-Side Power Switch (PROFET +12V) | — |
| Number of Channels | 2 (independent) | 2 |
| Topologie | High-side N-channel MOSFET with charge pump | Dual High-Side Switch (2 channels) |
| Continuous Load Current per Channel | 2 A | — |
| On-Resistance (Rds(on)) | 110 mΩ typical | — |
| Operating Voltage (Vbb) | 3.1 V to 28 V | 8 V to 18 V |
| Logic Input Voltage (IN) | Active high, CMOS-compatible | — |
| Standby Current | [DATA_NEEDED: standby current value] | — |
| Current Sense Output (IS) | Analog proportional to load current | — |
| Over-Temperature Protection | Yes (thermal shutdown with auto-restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (–16 V rated via integrated path) | — |
| Short-Circuit Protection | Yes (current-limit, latching/off behaviour per mode) | — |
| Inductive Load Clamping | Yes (built-in active clamp) | — |
| Betriebstemperaturbereich | -40 °C to +150 °C junction | — |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Yes | — |
| RoHS Compliance | Compliant (lead-free) | — |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Betriebstemperatur | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |
| RoHS-Status | — | Compliant |