BTS71202EPGXUMA1 vs BTS51202EKAXUMA1 Comparação
Comparação detalhada lado a lado de BTS71202EPGXUMA1 por Infineon e BTS51202EKAXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS71202EPGXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,98 | $1,68 |
| Product Type | Smart High-Side Power Switch (PROFET +12V) | — |
| Number of Channels | 2 (independent) | 2 |
| Topologia | High-side N-channel MOSFET with charge pump | Dual High-Side Switch (2 channels) |
| Continuous Load Current per Channel | 2 A | — |
| On-Resistance (Rds(on)) | 110 mΩ typical | — |
| Operating Voltage (Vbb) | 3.1 V to 28 V | 8 V to 18 V |
| Logic Input Voltage (IN) | Active high, CMOS-compatible | — |
| Standby Current | [DATA_NEEDED: standby current value] | — |
| Current Sense Output (IS) | Analog proportional to load current | — |
| Over-Temperature Protection | Yes (thermal shutdown with auto-restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (–16 V rated via integrated path) | — |
| Short-Circuit Protection | Yes (current-limit, latching/off behaviour per mode) | — |
| Inductive Load Clamping | Yes (built-in active clamp) | — |
| Faixa de temperatura de operação | -40 °C to +150 °C junction | — |
| Encapsulamento | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Tipo de montagem | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Yes | — |
| RoHS Compliance | Compliant (lead-free) | — |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Temperatura de operação | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |
| Status RoHS | — | Compliant |