BTS71202EPGXUMA1 vs BTS51202EKAXUMA1 Сравнение

Подробное сравнение бок о бок BTS71202EPGXUMA1 от Infineon и BTS51202EKAXUMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Infineon
BTS71202EPGXUMA1 BTS71202EPGXUMA1 - 2-Ch 2A Smart High-Side Switch | Infineon

BTS71202EPGXUMA1 - 2-Ch 2A Smart High-Side Switch | Infineon

BTS71202EPGXUMA1 ✓ Активен
Infineon
BTS51202EKAXUMA1 BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon

BTS51202EKAXUMA1 - 120 mΩ Dual Smart High-Side Switch | Infineon

BTS51202EKAXUMA1 ✓ Активен

Сравнение характеристик

Параметр BTS71202EPGXUMA1 BTS51202EKAXUMA1
Бренд Infineon Infineon
Категория Power MOSFET Drivers Power MOSFET Drivers
Статус жизненного цикла Активен Активен
Наличие In Stock In Stock
Цена за единицу (USD) $0,98 $1,68
Product Type Smart High-Side Power Switch (PROFET +12V) —
Number of Channels 2 (independent) 2
Топология High-side N-channel MOSFET with charge pump Dual High-Side Switch (2 channels)
Continuous Load Current per Channel 2 A —
On-Resistance (Rds(on)) 110 mΩ typical —
Operating Voltage (Vbb) 3.1 V to 28 V 8 V to 18 V
Logic Input Voltage (IN) Active high, CMOS-compatible —
Standby Current [DATA_NEEDED: standby current value] —
Current Sense Output (IS) Analog proportional to load current —
Over-Temperature Protection Yes (thermal shutdown with auto-restart) —
Over-Voltage Protection (Vbb clamp) Yes (load-dump tolerant) —
Reverse Battery Protection Yes (–16 V rated via integrated path) —
Short-Circuit Protection Yes (current-limit, latching/off behaviour per mode) —
Inductive Load Clamping Yes (built-in active clamp) —
Диапазон рабочих температур -40 °C to +150 °C junction —
Корпус PG-TSDSO-14 (exposed pad) PG-DSO-14-40-EP (14-pin SOIC with exposed pad)
Тип монтажа Surface Mount Surface Mount
AEC-Q100 Qualification Yes —
RoHS Compliance Compliant (lead-free) —
Technology — Smart6 (N-channel vertical MOSFET with charge pump)
On-State Resistance (RDS(on)) — 120 mΩ (typical per channel)
Continuous Output Current — 2 A per channel (typical 2.5 A)
Load Type — Lamps up to 1×10 W, LEDs, resistive/inductive loads
Рабочая температура — -40 °C to +150 °C
Maximum Power Dissipation — 1800 mW
Integrated Protection — Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery
Diagnostic Output — Yes (status feedback pin)
Charge Pump — Integrated
Automotive Qualified — Yes
Статус RoHS — Compliant

Даташиты & ресурсы

Все товары Создать BOM Запросить цену