BTS71202EPGXUMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS71202EPGXUMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS71202EPGXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,98 | $1,68 |
| Product Type | Smart High-Side Power Switch (PROFET +12V) | — |
| Number of Channels | 2 (independent) | 2 |
| Topologie | High-side N-channel MOSFET with charge pump | Dual High-Side Switch (2 channels) |
| Continuous Load Current per Channel | 2 A | — |
| On-Resistance (Rds(on)) | 110 mΩ typical | — |
| Operating Voltage (Vbb) | 3.1 V to 28 V | 8 V to 18 V |
| Logic Input Voltage (IN) | Active high, CMOS-compatible | — |
| Standby Current | [DATA_NEEDED: standby current value] | — |
| Current Sense Output (IS) | Analog proportional to load current | — |
| Over-Temperature Protection | Yes (thermal shutdown with auto-restart) | — |
| Over-Voltage Protection (Vbb clamp) | Yes (load-dump tolerant) | — |
| Reverse Battery Protection | Yes (–16 V rated via integrated path) | — |
| Short-Circuit Protection | Yes (current-limit, latching/off behaviour per mode) | — |
| Inductive Load Clamping | Yes (built-in active clamp) | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Yes | — |
| RoHS Compliance | Compliant (lead-free) | — |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |
| Statut RoHS | — | Compliant |