BTS712204ESAXUMA1 vs BTS70402EPGXUMA1 مقایسه
مقایسه دقیق کنار به کنار BTS712204ESAXUMA1 توسط Infineon و BTS70402EPGXUMA1 توسط Infineon. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | BTS712204ESAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| برند | Infineon | Infineon |
| دسته‌بندی | Power MOSFET Drivers | Power MOSFET Drivers |
| وضعیت چرخه عمر | فعال | فعال |
| Product Type | Smart High-Side Power Switch (SPOC) | — |
| Number of Channels | 4 | 4 |
| پیکربندی خروجی | High-side (N-channel DMOS) | High-side, N-channel MOSFET |
| On-State Resistance (RDS(on)) | 200 mΩ per channel (typ) | — |
| Output Current per Channel (Source) | 3 A | — |
| Output Current per Channel (Sink) | 5 A | — |
| Current Limit (typ) | 5 A | — |
| Supply Voltage VBB (Operating) | 4.0 V to 28 V | — |
| Load Dump Tolerance | 35 V | — |
| SPI Clock Frequency | 5 MHz | — |
| Quiescent Current (typ) | 80 µA | — |
| دمای کاری | -40 °C to +150 °C (junction) | — |
| بسته‌بندی | PG-TSDSO-24 EP | PG-TSDSO-14 (exposed thermal pad) |
| نوع نصب | Surface Mount | Surface Mount |
| سطح MSL | 3 (168 hours) | — |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| Diagnostics | 24-bit SPI current readback + fault flags | — |
| Lead-Free / RoHS | Yes (Compliant) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| عملکرد | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| محدوده دمای کاری | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |