BTS712204ESAXUMA1 vs BTS70402EPGXUMA1 तुलना

विस्तृत दोनों ओर की तुलना BTS712204ESAXUMA1 द्वारा Infineon और BTS70402EPGXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
BTS712204ESAXUMA1 BTS712204ESAXUMA1 - 4-Ch 5A SPOC Smart Switch | Infineon

BTS712204ESAXUMA1 - 4-Ch 5A SPOC Smart Switch | Infineon

BTS712204ESAXUMA1 ✓ सक्रिय
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर BTS712204ESAXUMA1 BTS70402EPGXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch (SPOC) —
Number of Channels 4 4
आउटपुट कॉन्फ़िगरेशन High-side (N-channel DMOS) High-side, N-channel MOSFET
On-State Resistance (RDS(on)) 200 mΩ per channel (typ) —
Output Current per Channel (Source) 3 A —
Output Current per Channel (Sink) 5 A —
Current Limit (typ) 5 A —
Supply Voltage VBB (Operating) 4.0 V to 28 V —
Load Dump Tolerance 35 V —
SPI Clock Frequency 5 MHz —
Quiescent Current (typ) 80 µA —
ऑपरेटिंग तापमान -40 °C to +150 °C (junction) —
पैकेज PG-TSDSO-24 EP PG-TSDSO-14 (exposed thermal pad)
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर 3 (168 hours) —
Automotive Qualification AEC-Q100 Grade 1 —
Diagnostics 24-bit SPI current readback + fault flags —
Lead-Free / RoHS Yes (Compliant) —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
फ़ंक्शन — Smart High-Side Power Switch
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Protection Features — Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Diagnostic Interface — SPI status register, current-sense feedback
ऑपरेटिंग तापमान रेंज — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध