INA115BUG4 vs INA115BU Comparison

Detailed side-by-side comparison of INA115BUG4 by Texas Instruments and INA115BU by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Texas Instruments
INA115BUG4 INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 ✓ Active
Texas Instruments
INA115BU INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU ✓ Active

Specification Comparison

Parameter INA115BUG4 INA115BU
Brand Texas Instruments Texas Instruments
Category Amplifier ICs Amplifier ICs
Lifecycle Status Active Active
Product Type Precision instrumentation amplifier —
Number of Amplifiers 3 amplifiers 1 circuit
Gain-Bandwidth Product 1 MHz —
Input Offset Voltage 50 µV —
Input Noise Density 11 nV/√Hz 11 nV/sqrt(Hz)
Power Consumption 3 mA —
Supply Voltage Range 2.25 V to 18 V 2.25 V to 18 V
Slew Rate 0.6 V/µs 0.6 V/us
Maximum Supply Voltage 50 V —
Output Type Single-ended —
Internal Amplifier Connections A1 and A2 connections —
Architecture Three-op-amp instrumentation amplifier Three-op-amp instrumentation amplifier
Package 16-SOIC, 0.295 inch (7.50 mm) body width 16-pin SOIC
Mounting Type Surface mount Surface mount
Operating Temperature Range [DATA_NEEDED: operating temperature range] —
Gain Range [DATA_NEEDED: gain range] —
Input Common-Mode Range [DATA_NEEDED: input common-mode range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Input Bias Current [DATA_NEEDED: input bias current] —
Gain Error [DATA_NEEDED: gain error] —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Amplifier Type — Precision instrumentation amplifier
Bandwidth — 1 MHz
Maximum Offset Voltage — 50 uV
Input Offset Voltage Drift — 0.25 uV/degree C maximum
Maximum Input Bias Current — 2 nA
Minimum Common-Mode Rejection — 115 dB
Input Over-Voltage Protection — plus or minus 40 V
Maximum Total Supply Voltage — plus or minus 18 V
Maximum Quiescent Current — 3 mA
Switched Gain — Enabled through exposed input-amplifier connections
RoHS Status — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

Datasheets & Resources

Browse All Products Create BOM Request Quote