INA115BUG4 vs INA115BU 比較
詳細並排比較 INA115BUG4 由 Texas Instruments 與 INA115BU 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | INA115BUG4 | INA115BU |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Precision instrumentation amplifier | — |
| Number of Amplifiers | 3 amplifiers | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 µV | — |
| Input Noise Density | 11 nV/√Hz | 11 nV/sqrt(Hz) |
| Power Consumption | 3 mA | — |
| Supply Voltage Range | 2.25 V to 18 V | 2.25 V to 18 V |
| Slew Rate | 0.6 V/µs | 0.6 V/us |
| Maximum Supply Voltage | 50 V | — |
| 輸出類型 | Single-ended | — |
| Internal Amplifier Connections | A1 and A2 connections | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| 封裝 | 16-SOIC, 0.295 inch (7.50 mm) body width | 16-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| Gain Range | [DATA_NEEDED: gain range] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Bandwidth | — | 1 MHz |
| Maximum Offset Voltage | — | 50 uV |
| Input Offset Voltage Drift | — | 0.25 uV/degree C maximum |
| Maximum Input Bias Current | — | 2 nA |
| Minimum Common-Mode Rejection | — | 115 dB |
| Input Over-Voltage Protection | — | plus or minus 40 V |
| Maximum Total Supply Voltage | — | plus or minus 18 V |
| Maximum Quiescent Current | — | 3 mA |
| Switched Gain | — | Enabled through exposed input-amplifier connections |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |