INA115BUG4 vs INA115BU Сравнение

Подробное сравнение бок о бок INA115BUG4 от Texas Instruments и INA115BU от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Texas Instruments
INA115BUG4 INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 ✓ Активен
Texas Instruments
INA115BU INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU ✓ Активен

Сравнение характеристик

Параметр INA115BUG4 INA115BU
Бренд Texas Instruments Texas Instruments
Категория Amplifier ICs Amplifier ICs
Статус жизненного цикла Активен Активен
Product Type Precision instrumentation amplifier —
Number of Amplifiers 3 amplifiers 1 circuit
Gain-Bandwidth Product 1 MHz —
Input Offset Voltage 50 µV —
Input Noise Density 11 nV/√Hz 11 nV/sqrt(Hz)
Power Consumption 3 mA —
Supply Voltage Range 2.25 V to 18 V 2.25 V to 18 V
Slew Rate 0.6 V/µs 0.6 V/us
Maximum Supply Voltage 50 V —
Тип выхода Single-ended —
Internal Amplifier Connections A1 and A2 connections —
Architecture Three-op-amp instrumentation amplifier Three-op-amp instrumentation amplifier
Корпус 16-SOIC, 0.295 inch (7.50 mm) body width 16-pin SOIC
Тип монтажа Surface mount Surface mount
Диапазон рабочих температур [DATA_NEEDED: operating temperature range] —
Gain Range [DATA_NEEDED: gain range] —
Input Common-Mode Range [DATA_NEEDED: input common-mode range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Input Bias Current [DATA_NEEDED: input bias current] —
Gain Error [DATA_NEEDED: gain error] —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Amplifier Type — Precision instrumentation amplifier
Bandwidth — 1 MHz
Maximum Offset Voltage — 50 uV
Input Offset Voltage Drift — 0.25 uV/degree C maximum
Maximum Input Bias Current — 2 nA
Minimum Common-Mode Rejection — 115 dB
Input Over-Voltage Protection — plus or minus 40 V
Maximum Total Supply Voltage — plus or minus 18 V
Maximum Quiescent Current — 3 mA
Switched Gain — Enabled through exposed input-amplifier connections
Статус RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

Даташиты & ресурсы

Все товары Создать BOM Запросить цену