INA115BUG4 vs INA115BU So sánh

So sánh chi tiết song song của INA115BUG4 bằng Texas Instruments và INA115BU bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
INA115BUG4 INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 ✓ Hoạt động
Texas Instruments
INA115BU INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số INA115BUG4 INA115BU
Thương hiệu Texas Instruments Texas Instruments
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Precision instrumentation amplifier —
Number of Amplifiers 3 amplifiers 1 circuit
Gain-Bandwidth Product 1 MHz —
Input Offset Voltage 50 µV —
Input Noise Density 11 nV/√Hz 11 nV/sqrt(Hz)
Power Consumption 3 mA —
Supply Voltage Range 2.25 V to 18 V 2.25 V to 18 V
Slew Rate 0.6 V/µs 0.6 V/us
Maximum Supply Voltage 50 V —
Kiểu đầu ra Single-ended —
Internal Amplifier Connections A1 and A2 connections —
Architecture Three-op-amp instrumentation amplifier Three-op-amp instrumentation amplifier
Hộp 16-SOIC, 0.295 inch (7.50 mm) body width 16-pin SOIC
Kiểu lắp đặt Surface mount Surface mount
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] —
Gain Range [DATA_NEEDED: gain range] —
Input Common-Mode Range [DATA_NEEDED: input common-mode range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Input Bias Current [DATA_NEEDED: input bias current] —
Gain Error [DATA_NEEDED: gain error] —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Amplifier Type — Precision instrumentation amplifier
Bandwidth — 1 MHz
Maximum Offset Voltage — 50 uV
Input Offset Voltage Drift — 0.25 uV/degree C maximum
Maximum Input Bias Current — 2 nA
Minimum Common-Mode Rejection — 115 dB
Input Over-Voltage Protection — plus or minus 40 V
Maximum Total Supply Voltage — plus or minus 18 V
Maximum Quiescent Current — 3 mA
Switched Gain — Enabled through exposed input-amplifier connections
Trạng thái RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá