INA115BUG4 vs INA115BU Perbandingan

Perbandingan bersamaan detil INA115BUG4 dari Texas Instruments dan INA115BU dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
INA115BUG4 INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 - 1MHz Precision Instrumentation Amplifier | TI

INA115BUG4 ✓ Aktif
Texas Instruments
INA115BU INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU - 1MHz Low-Noise INA | Texas Instruments

INA115BU ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum INA115BUG4 INA115BU
Merek Texas Instruments Texas Instruments
Kategori Amplifier ICs Amplifier ICs
Status Lingkungan Hidup Aktif Aktif
Product Type Precision instrumentation amplifier —
Number of Amplifiers 3 amplifiers 1 circuit
Gain-Bandwidth Product 1 MHz —
Input Offset Voltage 50 µV —
Input Noise Density 11 nV/√Hz 11 nV/sqrt(Hz)
Power Consumption 3 mA —
Supply Voltage Range 2.25 V to 18 V 2.25 V to 18 V
Slew Rate 0.6 V/µs 0.6 V/us
Maximum Supply Voltage 50 V —
Tipe Output Single-ended —
Internal Amplifier Connections A1 and A2 connections —
Architecture Three-op-amp instrumentation amplifier Three-op-amp instrumentation amplifier
Paket 16-SOIC, 0.295 inch (7.50 mm) body width 16-pin SOIC
Tipe Mounting Surface mount Surface mount
Rentang Suhu Kerja [DATA_NEEDED: operating temperature range] —
Gain Range [DATA_NEEDED: gain range] —
Input Common-Mode Range [DATA_NEEDED: input common-mode range] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Input Bias Current [DATA_NEEDED: input bias current] —
Gain Error [DATA_NEEDED: gain error] —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Amplifier Type — Precision instrumentation amplifier
Bandwidth — 1 MHz
Maximum Offset Voltage — 50 uV
Input Offset Voltage Drift — 0.25 uV/degree C maximum
Maximum Input Bias Current — 2 nA
Minimum Common-Mode Rejection — 115 dB
Input Over-Voltage Protection — plus or minus 40 V
Maximum Total Supply Voltage — plus or minus 18 V
Maximum Quiescent Current — 3 mA
Switched Gain — Enabled through exposed input-amplifier connections
Status RoHS — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon