INA2126UG4 vs INA2126U Comparison
Detailed side-by-side comparison of INA2126UG4 by Texas Instruments and INA2126U by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI
INA2126UG4 ✓ ActiveTexas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ ActiveSpecification Comparison
| Parameter | INA2126UG4 | INA2126U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Device Type | Dual precision instrumentation amplifier | — |
| Channel Count | 2 channels | — |
| Maximum Supply Voltage | 36 V | — |
| Supply Voltage Range | ±1.35 V to ±18 V | — |
| Single-Supply Minimum | 2.7 V | — |
| Quiescent Current | 175 µA per channel | — |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp instrumentation-amplifier design | — |
| Input Type | Differential | — |
| Signal Type | Low-level differential-signal acquisition | — |
| Package | 16-pin SOIC, 3.90 mm width | 16-pin SOIC |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Settings | [DATA_NEEDED: available gain settings] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Voltage Range | [DATA_NEEDED: output voltage range] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Noise Performance | [DATA_NEEDED: input noise density] | — |
| Bandwidth | [DATA_NEEDED: signal bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Number of Channels | — | 2 channels |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |