INA2126UG4 vs INA2126U Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA2126UG4 sa pamamagitan ng Texas Instruments at INA2126U sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI
INA2126UG4 ✓ NakahandaTexas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ NakahandaPagsanggunian na paghahambing
| Parametro | INA2126UG4 | INA2126U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Device Type | Dual precision instrumentation amplifier | — |
| Channel Count | 2 channels | — |
| Maximum Supply Voltage | 36 V | — |
| Supply Voltage Range | ±1.35 V to ±18 V | — |
| Single-Supply Minimum | 2.7 V | — |
| Kuru-kuryente ng Kapayapaan | 175 µA per channel | — |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp instrumentation-amplifier design | — |
| Input Type | Differential | — |
| Signal Type | Low-level differential-signal acquisition | — |
| Packhaging | 16-pin SOIC, 3.90 mm width | 16-pin SOIC |
| Uri ng Pagpapasok | Surface mount | Surface mount |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Settings | [DATA_NEEDED: available gain settings] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Hanay ng Output Volte | [DATA_NEEDED: output voltage range] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Noise Performance | [DATA_NEEDED: input noise density] | — |
| Bandwidth | [DATA_NEEDED: signal bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Number of Channels | — | 2 channels |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |