INA2126UG4 vs INA2126U Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA2126UG4 tarafından Texas Instruments ve INA2126U tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI
INA2126UG4 ✓ AktifTexas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ AktifÖzellik Karşılaştırması
| Parametre | INA2126UG4 | INA2126U |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Device Type | Dual precision instrumentation amplifier | — |
| Channel Count | 2 channels | — |
| Maximum Supply Voltage | 36 V | — |
| Supply Voltage Range | ±1.35 V to ±18 V | — |
| Single-Supply Minimum | 2.7 V | — |
| Durağan Akım | 175 µA per channel | — |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp instrumentation-amplifier design | — |
| Input Type | Differential | — |
| Signal Type | Low-level differential-signal acquisition | — |
| Paket | 16-pin SOIC, 3.90 mm width | 16-pin SOIC |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Settings | [DATA_NEEDED: available gain settings] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Çıkış Gerilimi Aralığı | [DATA_NEEDED: output voltage range] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Noise Performance | [DATA_NEEDED: input noise density] | — |
| Bandwidth | [DATA_NEEDED: signal bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Number of Channels | — | 2 channels |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |