INA2126UG4 vs INA2126U Perbandingan
Perbandingan bersamaan detil INA2126UG4 dari Texas Instruments dan INA2126U dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA2126UG4 - 36V Dual Micropower Instrumentation Amplifier | TI
INA2126UG4 ✓ AktifTexas Instruments
INA2126U - 36V Dual Micropower Instrumentation Amplifier | Texas Instruments
INA2126U ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA2126UG4 | INA2126U |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | Dual precision instrumentation amplifier | — |
| Channel Count | 2 channels | — |
| Maximum Supply Voltage | 36 V | — |
| Supply Voltage Range | ±1.35 V to ±18 V | — |
| Single-Supply Minimum | 2.7 V | — |
| Arus Memerintah | 175 µA per channel | — |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp instrumentation-amplifier design | — |
| Input Type | Differential | — |
| Signal Type | Low-level differential-signal acquisition | — |
| Paket | 16-pin SOIC, 3.90 mm width | 16-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain Settings | [DATA_NEEDED: available gain settings] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Rentang Tegangan Output | [DATA_NEEDED: output voltage range] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Noise Performance | [DATA_NEEDED: input noise density] | — |
| Bandwidth | [DATA_NEEDED: signal bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Dual precision instrumentation amplifier |
| Number of Channels | — | 2 channels |
| Maximum Total Supply Voltage | — | 36 V |
| Operating Supply Range | — | ±1.35 V to ±18 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Quiescent Current per Channel | — | 175 µA |
| Maximum Input Offset Voltage | — | 250 µV |
| Minimum Voltage Gain | — | 5 V/V |
| Maximum Voltage Gain | — | 10000 V/V |
| Typical Gain-Bandwidth Product | — | 200 kHz |
| Typical Input Noise Density at 1 kHz | — | 0.4 nV/√Hz |
| Internal Architecture | — | Two-op-amp instrumentation amplifier |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |