INA2128P vs INA121P Comparison
Detailed side-by-side comparison of INA2128P by Texas Instruments and INA121P by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ ActiveSpecification Comparison
| Parameter | INA2128P | INA121P |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Configuration | Dual instrumentation amplifier | — |
| Number of Amplifier Circuits | 2 circuits | — |
| Internal Architecture | 3-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Setting | 1 external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Offset Voltage | 50 uV maximum | ±200 µV typical |
| Input Offset Drift | 0.5 uV/degree C maximum | ±2 µV/°C typical |
| Input Bias Current | 5 nA maximum | ±4 pA typical |
| Common-Mode Rejection | 120 dB minimum | — |
| Input Protection Range | plus or minus 40 V | — |
| Supply Voltage Range | plus or minus 18 V | ±2.25 V to ±18 V |
| Input Circuitry | Current feedback | — |
| Power Class | Low power | — |
| Package | 16-pin PDIP (SOL-16) | 8-Pin PDIP (P) |
| Mounting Type | Through-hole | Through-Hole |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Quiescent Current per Amplifier | [DATA_NEEDED: quiescent current per amplifier] | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Swing Range | [DATA_NEEDED: output swing range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Quiescent Current | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |