INA2128P vs INA121P 比較
詳細並排比較 INA2128P 由 Texas Instruments 與 INA121P 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ 啟用中規格比較
| 參數 | INA2128P | INA121P |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Configuration | Dual instrumentation amplifier | — |
| Number of Amplifier Circuits | 2 circuits | — |
| Internal Architecture | 3-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Setting | 1 external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Offset Voltage | 50 uV maximum | ±200 µV typical |
| Input Offset Drift | 0.5 uV/degree C maximum | ±2 µV/°C typical |
| Input Bias Current | 5 nA maximum | ±4 pA typical |
| Common-Mode Rejection | 120 dB minimum | — |
| Input Protection Range | plus or minus 40 V | — |
| Supply Voltage Range | plus or minus 18 V | ±2.25 V to ±18 V |
| Input Circuitry | Current feedback | — |
| Power Class | Low power | — |
| 封裝 | 16-pin PDIP (SOL-16) | 8-Pin PDIP (P) |
| 安裝類型 | Through-hole | Through-Hole |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Quiescent Current per Amplifier | [DATA_NEEDED: quiescent current per amplifier] | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Swing Range | [DATA_NEEDED: output swing range] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| 靜態電流 | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |