INA2128P vs INA121P موازنہ
تفصیلی ساتھ ساتھ موازنہ از INA2128P بذریعہ Texas Instruments اور INA121P بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | INA2128P | INA121P |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Amplifier Configuration | Dual instrumentation amplifier | — |
| Number of Amplifier Circuits | 2 circuits | — |
| Internal Architecture | 3-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Setting | 1 external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Offset Voltage | 50 uV maximum | ±200 µV typical |
| Input Offset Drift | 0.5 uV/degree C maximum | ±2 µV/°C typical |
| Input Bias Current | 5 nA maximum | ±4 pA typical |
| Common-Mode Rejection | 120 dB minimum | — |
| Input Protection Range | plus or minus 40 V | — |
| Supply Voltage Range | plus or minus 18 V | ±2.25 V to ±18 V |
| Input Circuitry | Current feedback | — |
| Power Class | Low power | — |
| پیکیج | 16-pin PDIP (SOL-16) | 8-Pin PDIP (P) |
| ماؤنٹنگ ٹائپ | Through-hole | Through-Hole |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Quiescent Current per Amplifier | [DATA_NEEDED: quiescent current per amplifier] | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Swing Range | [DATA_NEEDED: output swing range] | — |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| کوئیسینٹ کرنٹ | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |