INA2128P vs INA121P Perbandingan
Perbandingan bersamaan detil INA2128P dari Texas Instruments dan INA121P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA2128P | INA121P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Configuration | Dual instrumentation amplifier | — |
| Number of Amplifier Circuits | 2 circuits | — |
| Internal Architecture | 3-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Setting | 1 external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Offset Voltage | 50 uV maximum | ±200 µV typical |
| Input Offset Drift | 0.5 uV/degree C maximum | ±2 µV/°C typical |
| Input Bias Current | 5 nA maximum | ±4 pA typical |
| Common-Mode Rejection | 120 dB minimum | — |
| Input Protection Range | plus or minus 40 V | — |
| Supply Voltage Range | plus or minus 18 V | ±2.25 V to ±18 V |
| Input Circuitry | Current feedback | — |
| Power Class | Low power | — |
| Paket | 16-pin PDIP (SOL-16) | 8-Pin PDIP (P) |
| Tipe Mounting | Through-hole | Through-Hole |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Quiescent Current per Amplifier | [DATA_NEEDED: quiescent current per amplifier] | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Swing Range | [DATA_NEEDED: output swing range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Arus Memerintah | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |