INA2128P vs INA121P Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA2128P tarafından Texas Instruments ve INA121P tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifÖzellik Karşılaştırması
| Parametre | INA2128P | INA121P |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Configuration | Dual instrumentation amplifier | — |
| Number of Amplifier Circuits | 2 circuits | — |
| Internal Architecture | 3-op-amp instrumentation amplifier | — |
| Gain Range | 1 to 10,000 | 1 V/V to 10,000 V/V (single external resistor) |
| Gain Setting | 1 external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Input Offset Voltage | 50 uV maximum | ±200 µV typical |
| Input Offset Drift | 0.5 uV/degree C maximum | ±2 µV/°C typical |
| Input Bias Current | 5 nA maximum | ±4 pA typical |
| Common-Mode Rejection | 120 dB minimum | — |
| Input Protection Range | plus or minus 40 V | — |
| Supply Voltage Range | plus or minus 18 V | ±2.25 V to ±18 V |
| Input Circuitry | Current feedback | — |
| Power Class | Low power | — |
| Paket | 16-pin PDIP (SOL-16) | 8-Pin PDIP (P) |
| Montaj Türü | Through-hole | Through-Hole |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Quiescent Current per Amplifier | [DATA_NEEDED: quiescent current per amplifier] | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Output Swing Range | [DATA_NEEDED: output swing range] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation Amplifier (3-op-amp topology) |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Durağan Akım | — | ±450 µA typical |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Nonlinearity Error | — | 0.001% (G = 10) |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |