ITS4142NHUMA1 vs BTS70021EPPXUMA1 तुलना

विस्तृत दोनों ओर की तुलना ITS4142NHUMA1 द्वारा Infineon और BTS70021EPPXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
ITS4142NHUMA1 ITS4142NHUMA1 - 1.4A Smart High-Side Switch SOT-223 | Infineon

ITS4142NHUMA1 - 1.4A Smart High-Side Switch SOT-223 | Infineon

ITS4142NHUMA1 ✓ सक्रिय
Infineon
BTS70021EPPXUMA1 BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon

BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon

BTS70021EPPXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर ITS4142NHUMA1 BTS70021EPPXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Manufacturer Infineon Technologies —
Product Type Smart High-Side Power Switch —
टोपोलॉजी 1:1 N-Channel High-Side Smart High-Side Switch, N-Channel MOSFET
आउटपुट की संख्या 1 —
Continuous Load Current 1.4 A —
On-Resistance (RDS(on)) [DATA_NEEDED: typical RDS(on) at 25C] —
ऑपरेटिंग सप्लाई वोल्टेज 5 V to 34 V (load-dump tolerant to 45 V) —
Logic Input Voltage Logic-level, 3.3 V and 5 V compatible —
Overvoltage Protection Yes, including load dump —
Undervoltage Shutdown Yes, with auto-restart and hysteresis —
Short Circuit Protection Yes, with current limitation —
Overload Protection Yes Yes (current limit)
थर्मल शटडाउन Yes —
Diagnostic Feedback Yes, open-drain status output —
Inductive Load Switching Yes, with internal clamping —
ऑपरेटिंग तापमान -40C to +125C (junction) —
पैकेज PG-SOT223-4 (4-pin SOT-223) PG-TSDSO-14-22 (exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
RoHS स्थिति Compliant Compliant (Green Product)
AEC-Q100 Qualification [DATA_NEEDED: automotive grade variant status] —
Product Family — PROFET+2 12V
Maximum Continuous Load Current — 21 A
On-State Resistance (RDS(on)) — 2.6 mOhm typical
Operating Supply Voltage (Vbb) — 6 V to 18 V
Transient Supply Voltage — 28 V (load dump tolerant)
Standby Current — [DATA_NEEDED: typical uA value]
Current Sense Output (IS) — Analog proportional load current
Fault Output (DEN/IN) — Yes, latched
Reverse Polarity Protection — Yes (ReverSave)
Short-Circuit Protection — Yes (latched)
Over-Temperature Protection — Yes (thermal shutdown with restart)
Over-Voltage Protection (Vbb clamp) — Yes
Load Dump Clamp Voltage — 41 V typical
Open-Load Detection — Yes (on-state and off-state)
PWM Capability — Yes, up to [DATA_NEEDED: max PWM frequency]
ऑपरेटिंग तापमान रेंज — -40 C to +150 C junction
Qualification — AEC-Q100 automotive qualified

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध