ITS4142NHUMA1 vs BTS70021EPPXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ITS4142NHUMA1 sa pamamagitan ng Infineon at BTS70021EPPXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ITS4142NHUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Manufacturer | Infineon Technologies | — |
| Product Type | Smart High-Side Power Switch | — |
| Topolohiya | 1:1 N-Channel High-Side | Smart High-Side Switch, N-Channel MOSFET |
| Bilang ng Outputs | 1 | — |
| Continuous Load Current | 1.4 A | — |
| On-Resistance (RDS(on)) | [DATA_NEEDED: typical RDS(on) at 25C] | — |
| Supply Voltage na Operasyon | 5 V to 34 V (load-dump tolerant to 45 V) | — |
| Logic Input Voltage | Logic-level, 3.3 V and 5 V compatible | — |
| Overvoltage Protection | Yes, including load dump | — |
| Undervoltage Shutdown | Yes, with auto-restart and hysteresis | — |
| Short Circuit Protection | Yes, with current limitation | — |
| Overload Protection | Yes | Yes (current limit) |
| Thermal Shutdown | Yes | — |
| Diagnostic Feedback | Yes, open-drain status output | — |
| Inductive Load Switching | Yes, with internal clamping | — |
| Temperature na Operasyon | -40C to +125C (junction) | — |
| Packhaging | PG-SOT223-4 (4-pin SOT-223) | PG-TSDSO-14-22 (exposed pad) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Tindminan RoHS | Compliant | Compliant (Green Product) |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive grade variant status] | — |
| Product Family | — | PROFET+2 12V |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Operating Supply Voltage (Vbb) | — | 6 V to 18 V |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Standby Current | — | [DATA_NEEDED: typical uA value] |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Hanay ng Temperature na Operasyon | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |