ITS4200SMEPHUMA1 vs TLE9104SHXUMA1 Comparison
Detailed side-by-side comparison of ITS4200SMEPHUMA1 by Infineon and TLE9104SHXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ITS4200SMEPHUMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart High-Side Power Switch | Multi-Channel Low-Side Power Switch |
| Topology | High-Side, N-Channel MOSFET | 1:1 N-Channel Low-Side Switch |
| Number of Channels | 1 | 4 |
| Continuous Load Current | 1.4 A | — |
| On-State Resistance (Rdson) | 150 milliohm (typical) | — |
| Supply Voltage Range | -3 V to 45 V | — |
| Overvoltage Protection | Yes (load-dump resilient) | — |
| Undervoltage Shutdown | Yes | — |
| Short Circuit Protection | Yes | — |
| Thermal Shutdown | Yes (with auto-restart) | — |
| Current Limitation | Yes | — |
| Input Logic Type | Current-Controlled, CMOS-compatible | — |
| Inductive Load Switching | Yes | — |
| Package | PG-SOT223-4 (4-pin, 3+Tab) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40C to +125C (automotive grade) | -40 °C to +150 °C (junction) |
| AEC-Q100 Qualification | Yes | — |
| Technology | Smart Power (vertical N-DMOS + charge pump + CMOS logic) | — |
| RoHS Status | Compliant | — |
| Load Current per Channel | — | 3 A (continuous) |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Protection Features | — | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| MSL Level | — | MSL3 (per JEDEC J-STD-020) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |