ITS4200SMEPHUMA1 vs TLE9104SHXUMA1 Comparación
Comparación detallada lado a lado de ITS4200SMEPHUMA1 por Infineon y TLE9104SHXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | ITS4200SMEPHUMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,99 | $3,72 |
| Product Type | Smart High-Side Power Switch | Multi-Channel Low-Side Power Switch |
| Topología | High-Side, N-Channel MOSFET | 1:1 N-Channel Low-Side Switch |
| Number of Channels | 1 | 4 |
| Continuous Load Current | 1.4 A | — |
| On-State Resistance (Rdson) | 150 milliohm (typical) | — |
| Supply Voltage Range | -3 V to 45 V | — |
| Overvoltage Protection | Yes (load-dump resilient) | — |
| Undervoltage Shutdown | Yes | — |
| Short Circuit Protection | Yes | — |
| Apagado térmico | Yes (with auto-restart) | — |
| Current Limitation | Yes | — |
| Input Logic Type | Current-Controlled, CMOS-compatible | — |
| Inductive Load Switching | Yes | — |
| Encapsulado | PG-SOT223-4 (4-pin, 3+Tab) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | -40C to +125C (automotive grade) | -40 °C to +150 °C (junction) |
| AEC-Q100 Qualification | Yes | — |
| Technology | Smart Power (vertical N-DMOS + charge pump + CMOS logic) | — |
| Estado RoHS | Compliant | — |
| Load Current per Channel | — | 3 A (continuous) |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Protection Features | — | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| Nivel MSL | — | MSL3 (per JEDEC J-STD-020) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |