ITS4200SMEPHUMA1 vs TLE9104SHXUMA1 Comparaison
Comparaison détaillée côte à côte de ITS4200SMEPHUMA1 par Infineon et TLE9104SHXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4200SMEPHUMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,99 | $3,72 |
| Product Type | Smart High-Side Power Switch | Multi-Channel Low-Side Power Switch |
| Topologie | High-Side, N-Channel MOSFET | 1:1 N-Channel Low-Side Switch |
| Number of Channels | 1 | 4 |
| Continuous Load Current | 1.4 A | — |
| On-State Resistance (Rdson) | 150 milliohm (typical) | — |
| Supply Voltage Range | -3 V to 45 V | — |
| Overvoltage Protection | Yes (load-dump resilient) | — |
| Undervoltage Shutdown | Yes | — |
| Short Circuit Protection | Yes | — |
| Arrêt thermique | Yes (with auto-restart) | — |
| Current Limitation | Yes | — |
| Input Logic Type | Current-Controlled, CMOS-compatible | — |
| Inductive Load Switching | Yes | — |
| Boîtier | PG-SOT223-4 (4-pin, 3+Tab) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40C to +125C (automotive grade) | -40 °C to +150 °C (junction) |
| AEC-Q100 Qualification | Yes | — |
| Technology | Smart Power (vertical N-DMOS + charge pump + CMOS logic) | — |
| Statut RoHS | Compliant | — |
| Load Current per Channel | — | 3 A (continuous) |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Protection Features | — | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| Niveau MSL | — | MSL3 (per JEDEC J-STD-020) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |