ITS4200SMEPHUMA1 vs TLE9104SHXUMA1 Vergleich
Detaillierter Direktvergleich von ITS4200SMEPHUMA1 von Infineon und TLE9104SHXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4200SMEPHUMA1 | TLE9104SHXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,99 | $3,72 |
| Product Type | Smart High-Side Power Switch | Multi-Channel Low-Side Power Switch |
| Topologie | High-Side, N-Channel MOSFET | 1:1 N-Channel Low-Side Switch |
| Number of Channels | 1 | 4 |
| Continuous Load Current | 1.4 A | — |
| On-State Resistance (Rdson) | 150 milliohm (typical) | — |
| Supply Voltage Range | -3 V to 45 V | — |
| Overvoltage Protection | Yes (load-dump resilient) | — |
| Undervoltage Shutdown | Yes | — |
| Short Circuit Protection | Yes | — |
| Thermisches Abschalten | Yes (with auto-restart) | — |
| Current Limitation | Yes | — |
| Input Logic Type | Current-Controlled, CMOS-compatible | — |
| Inductive Load Switching | Yes | — |
| Gehäuse | PG-SOT223-4 (4-pin, 3+Tab) | PG-DSO-20-88 (20-pin BFSOP with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40C to +125C (automotive grade) | -40 °C to +150 °C (junction) |
| AEC-Q100 Qualification | Yes | — |
| Technology | Smart Power (vertical N-DMOS + charge pump + CMOS logic) | — |
| RoHS-Status | Compliant | — |
| Load Current per Channel | — | 3 A (continuous) |
| Supply Voltage Range (VDD) | — | 4.5 V to 28 V |
| Logic Reference (VIO) | — | 3.3 V / 5 V compatible |
| Communication Interface | — | 16-bit SPI |
| R_DS(on) per Channel | — | [DATA_NEEDED: typical R_DS(on) in mohm] |
| Protection Features | — | Over-current, Over-temperature, Over-load, short-to-ground, open-load detection |
| Diagnostic Output | — | SPI status registers (per-channel fault flags) |
| Automotive Qualification | — | AEC-Q100 qualified (automotive grade) |
| MSL-Level | — | MSL3 (per JEDEC J-STD-020) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free |
| Reset Pin (RESN) | — | Active-low with configurable reset duration |