ITS4200SMEPHUMA1 vs TLE9104SHXUMA1 तुलना

विस्तृत दोनों ओर की तुलना ITS4200SMEPHUMA1 द्वारा Infineon और TLE9104SHXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
ITS4200SMEPHUMA1 ITS4200SMEPHUMA1 - 1.4A Smart High-Side Switch | Infineon

ITS4200SMEPHUMA1 - 1.4A Smart High-Side Switch | Infineon

ITS4200SMEPHUMA1 ✓ सक्रिय
Infineon
TLE9104SHXUMA1 TLE9104SHXUMA1 - 4-Ch 3A SPI Low-Side Switch | Infineon

TLE9104SHXUMA1 - 4-Ch 3A SPI Low-Side Switch | Infineon

TLE9104SHXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर ITS4200SMEPHUMA1 TLE9104SHXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Smart High-Side Power Switch Multi-Channel Low-Side Power Switch
टोपोलॉजी High-Side, N-Channel MOSFET 1:1 N-Channel Low-Side Switch
Number of Channels 1 4
Continuous Load Current 1.4 A —
On-State Resistance (Rdson) 150 milliohm (typical) —
Supply Voltage Range -3 V to 45 V —
Overvoltage Protection Yes (load-dump resilient) —
Undervoltage Shutdown Yes —
Short Circuit Protection Yes —
थर्मल शटडाउन Yes (with auto-restart) —
Current Limitation Yes —
Input Logic Type Current-Controlled, CMOS-compatible —
Inductive Load Switching Yes —
पैकेज PG-SOT223-4 (4-pin, 3+Tab) PG-DSO-20-88 (20-pin BFSOP with exposed pad)
माउंटिंग प्रकार Surface Mount Surface Mount
ऑपरेटिंग तापमान -40C to +125C (automotive grade) -40 °C to +150 °C (junction)
AEC-Q100 Qualification Yes —
Technology Smart Power (vertical N-DMOS + charge pump + CMOS logic) —
RoHS स्थिति Compliant —
Load Current per Channel — 3 A (continuous)
Supply Voltage Range (VDD) — 4.5 V to 28 V
Logic Reference (VIO) — 3.3 V / 5 V compatible
Communication Interface — 16-bit SPI
R_DS(on) per Channel — [DATA_NEEDED: typical R_DS(on) in mohm]
Protection Features — Over-current, Over-temperature, Over-load, short-to-ground, open-load detection
Diagnostic Output — SPI status registers (per-channel fault flags)
Automotive Qualification — AEC-Q100 qualified (automotive grade)
MSL स्तर — MSL3 (per JEDEC J-STD-020)
RoHS / Lead-Free — RoHS compliant, lead-free
Reset Pin (RESN) — Active-low with configurable reset duration

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध