MAX3232CPWRG4 vs MAX3232EIPWRQ1 Comparison
Detailed side-by-side comparison of MAX3232CPWRG4 by Texas Instruments and MAX3232EIPWRQ1 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
MAX3232CPWRG4 - 250 kbps Dual RS-232 Transceiver, 3-5.5 V, 16-TSSOP | Texas Instruments
MAX3232CPWRG4 ✓ ActiveTexas Instruments
MAX3232EIPWRQ1 - 250kbps RS-232 Transceiver | Texas Instruments
MAX3232EIPWRQ1 ✓ ActiveSpecification Comparison
| Parameter | MAX3232CPWRG4 | MAX3232EIPWRQ1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | RS-232 line driver/receiver (transceiver) IC | — |
| Number of Line Drivers | 2 | — |
| Number of Line Receivers | 2 | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbit/s |
| ESD Protection (Terminal to Terminal) | +/-15 kV | — |
| Standard Compliance | TIA/EIA-232-F | — |
| Charge Pump | Dual on-chip charge-pump circuit | — |
| External Charge-Pump Capacitors | 4 (C1+, C1-, C2+, C2-) | — |
| Package | 16-pin TSSOP (PW) | 16-pin TSSOP |
| Mounting Type | Surface Mount | Surface mount |
| Logic Levels (Driver Input / Receiver Output) | CMOS/TTL compatible | — |
| Transceiver Configuration | 2/2 (two drivers, two receivers) | 2/2 full-duplex |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Current (Quiescent) | [DATA_NEEDED: quiescent supply current] | — |
| Propagation Delay | [DATA_NEEDED: driver and receiver propagation delay] | — |
| Slew Rate | [DATA_NEEDED: RS-232 driver slew rate] | — |
| Receiver Fail-Safe Biasing | [DATA_NEEDED: receiver fail-safe characteristics] | — |
| RoHS Status | Compliant (G4 suffix denotes lead-free green package) | [DATA_NEEDED: RoHS compliance status] |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Interface Standard | — | ITU V.28 |
| ESD Protection | — | ±15 kV IEC, pin-to-pin |
| Charge-Pump Supply Outputs | — | V+ and V− |
| Standby Current | — | 300 µA typical |
| Automotive Qualification | — | AEC-Q100 qualified |
| Package Width | — | 4.40 mm |
| Package Length | — | 0.173 in |
| Packaging | — | Tape and reel |